INTERACTIVE TEACHING IN INTERPERSONAL SKILLS AS INNOVATION IN ENGINEERING EDUCATION

INTERACTIVE TEACHING IN INTERPERSONAL SKILLS AS INNOVATION IN ENGINEERING EDUCATION

J. Christensen, M. Karhu, C. Christensen, J. Martelius (2018).  INTERACTIVE TEACHING IN INTERPERSONAL SKILLS AS INNOVATION IN ENGINEERING EDUCATION. 10.

Nowadays the typical engineer has working conditions different from before. They require many competences other than just the hard-core technical ones: personal and professional skills, multidisciplinary teamwork, communication, communication in foreign languages and leadership skills; thus, the personal competences are becoming more important. It is vital that the modern education for engineering students meets the demands of the business life of today, where the engineer has to solve both technical and interpersonal problems. For this reason, it is important to implement practises of interpersonal skills in the engineering education. International communication is one of the issues becoming more important in the globalised world of today. The CDIO Syllabus narrates the needed skills and one way of improving the quality and ideas in the CDIO implementation is through international co-operation. In this case the co-operation was begun through the invitation of Associate Professor Christensen to give an International Communication Course, in February 2010, at Helsinki Metropolia University of Applied Sciences. This invitation has been repeated twice a year since then. The International Communication Course is an innovation in engineering education based on the development of teaching methods for learning interpersonal skills in interactive classes – enabling the students to gather their own experiences through active involvement in exercises in groups of two to six persons. In order to improve the course a couple of initiatives were implemented. One is a course booklet, which contains all issues to be approached during the course. The students read the booklet beforehand and thus the course just consists of interactive exercises with interventions of explaining, sharing comments and discussion. Sharing comments and discussions are very important as they both tell the students that others have similar problems and issues as they do; but they also show the differences between young people from different cultures. In a class there are usually participants from 15 different countries and students from 55 countries have taken the course so far. Another initiative is that the students have to do three assignments. One reason for this is to see if they are able to apply what they have learned; but also to avoid students that will not deliver the efforts required. This has elevated the level of learning significantly. Based on students’ assignments written during the courses and the course booklet, the content of the course was crystallized, a book was written and published in 2017 by Metropolia. This paper discusses our experiences of the international CDIO co-operation, implementing an International Communication Course at Metropolia. 

Authors (New): 
Jørgen Erik Christensen
Markku Karhu
Cecillia Christensen
Jonita Martelius
Pages: 
10
Affiliations: 
Technical University of Denmark, Denmark
Helsinki Metropolia University of Applied Sciences, Finland
Keywords: 
Communication
interactive teaching
integration of international students
interpersonal skills
Teamwork
CDIO Standard 2
CDIO Standard 8
CDIO Standard 11
Year: 
2018
Reference: 
Biggs, J. (1999). Teaching for quality learning, SRHE & Open University Press. : 
ISBN 0-335-20171-7.
Biggs, J., & Tang, C. (2007). Teaching for Quality Learning at University. SRHE & Open University Press. : 
ISBN 10-0-335-22126-2.
CDIO, (2018) http://www.cdio.org/implementing-cdio/standards/12-cdio-standards#standard2 and http://www.cdio.org/content/cdio-standard-21, accessed in 10 April 2018 : 
Christensen, J. E., & Ribu, K. (2007), Participation of Students in the Teaching Development, Innovation 2007 – World Innovations in Engineering Education and Research, Begell House Publishing, iNEER, Arlington, VA 22205, USA, ISBN 978-0-9741252-6-8, 2007, page 139-146. : 
ISBN 978-0-9741252-6-8
Christensen, J. E., Rode, C., & Borchersen, E. (2009), Development of Evaluation Procedure for Effective Implementation of CDIO, Proceedings of the 5th International CDIO Conference, Singapore Polytechnic, Singapore, June 7 - 10, 2009. : 
Christensen, J. E., Karhu, M., & Christensen, C. (2017). International Communication – Experienced from Students´ Perspective. Metropolia University of Applied Sciences. ISBN 978-952-328-027-4 (printed) / ISBN 978-952-328-028-1 (online publication) / ISSN 1799-6015 (printed) / ISSN 1799-6023 (online publication). : 
Crawley, E., Malmquist, J., Ostlund S., & Brodeur D. (2007). Rethinking Engineering Education – The CDIO Approach. Springer. : 
ISBN 978-0-387-38287-6.
Crawley, E., Malmquist, J., Lucas, W., & Brodeur D. (2011). The CDIO Syllabus v2.0. An Updated Statement of Goals for Engineering Education, Proceedings of the 7th International CDIO Conference, Technical University of Denmark, Copenhagen, June 20 - 23, 2011. : 
Grasha, A. F. (1996), Teaching with style, Pittsburgh, PA: Alliance. : 
Jank, W., & Meyer, H. (2006). Didaktiske modeller. Grundbog i didaktik, (in Danish only, Didactics Models. Introduction to Didactics), Gyldendals Lærerbibliotek : 
ISBN-13: 987-87-02-02918-5.
Krogsbøll, A., Christensen, J. E., & Hussmann P. M., (2010). Evaluation of Learning Outcomes in CDIO Programme within Civil Engineering, Proceedings of the 6th International CDIO Conference, École Polytechnique, Montréal, June 15-18, 2010. : 
Krogsbøll, A., Simonsen, C., Christensen, J. E., Beier Larsen, T., Goltermann, P., Koss, H., & Sand, J., (2011). CDIO Projects in Civil Engineering Study Program at DTU, 7th International CDIO Conference, Technical University of Denmark, Copenhagen, Denmark, June 20 - 23, 2011. : 
Kruse, S. (2006). Udvikling af universitetslærerens pædagogiske kompetencer – En didaktisk skitse, (only in Danish, Development of Pedagogical Competences for University Teachers – A Didactic Draft). Dansk Universitetspædagogisk Tidsskrift, nr. 2, 2006. : 
Meyer, H. (2006). Hvad er god undervisning? (in Danish only, What is good teaching?) Gyldendals Lærerbibliotek. : 
ISBN 978-87-02-03873-0.
Nyborg, M., Gustafsson, F., & Christensen, J. E. (2011). Developing Open Source System Expertise in Europe (DOSSEE). 7th International CDIO Conference, Technical University of Denmark, Copenhagen, Denmark, June 20 - 23, 2011. : 
Rode, C., Christensen, J. E., &. Simonsen, C. (2011). A Design Build Activity for a “Design Build” Course, 7th International CDIO Conference, Technical University of Denmark, Copenhagen, Denmark, June 20 - 23, 2011. : 
Go to top