EVALUATION OF STUDENTS’ PERFORMANCE IN CDIO PROJECTS THROUGH BLENDED LEARNING

EVALUATION OF STUDENTS’ PERFORMANCE IN CDIO PROJECTS THROUGH BLENDED LEARNING

S. Manna, N. Battikh, A. Nortcliffe, J. Camm (2022).  EVALUATION OF STUDENTS’ PERFORMANCE IN CDIO PROJECTS THROUGH BLENDED LEARNING. 647-658.

Current engineering job sectors do not only demand theoretical technical knowledge but also hands-on skills and critical thinking to ensure that engineering graduates are adaptive to the evolving and innovative world. Hence, several engineering modules at Canterbury Christ Church University have incorporated CDIO projects to integrate professional skills into the course. Following the UK government COVID-19 lockdown guidelines in 2020, traditional oncampus face-to-face learning was restricted at UK universities and colleges; therefore, students faced several challenges from academic and wellbeing perspectives. To overcome the challenges and enhance those professional skills through CDIO projects whilst following COVID-19 restrictions, blended learning was implemented via reconfiguring the delivery and implementation of the CDIO projects through an optimal arrangement of online and on-campus sessions. Online CDIO practical sessions were dedicated to students for transforming their ideas into feasible designs and solutions whereas students developed the hardware prototype during the face-to-face sessions. The learning framework was inclusive with additional support for disabled students with accessible learning materials and supportive technical and professional training. The above strategy also helped students to complete their online assessment to achieve the required professional attributes and manage online/blended groupbased tasks appropriately. Their outcome of the CDIO project was impressive and the quality of those projects is comparable to final-year projects. The performance of the students was also encouraging as the first-time overall pass rate is relatively high (86%) for a cohort of 75 students where average marks are around 59.6 and standard deviation is around 18.5. The high success rate was achieved in all areas of the cohort, for example the pass rate in BAME students was 93.75%, in female students it was 98.43%, and in disabled students it was 98.43%. A survey on students’ experience shows that they benefited highly from the sessions related to the CDIO project.

Authors (New): 
Soumya K. Manna
Najah Battikh
Anne Nortcliffe
Joseph Camm
Pages: 
647-658
Affiliations: 
Canterbury Christ Church University, UK
University of Liverpool, United Kingdom
Keywords: 
Blended Learning
CDIO project implementation
Inclusive learning
Professional skills
CDIO Standard 3
Year: 
2022
Reference: 
CDIO (2020). CDIO Standards 3.0. Retrieved 13th April 2022, from http://www.cdio.org/content/cdiostandards- 30.: 
Chuchalin, A. (2020). Evolution of the CDIO approach: BEng, MSc, and PhD level. European Journal of Engineering Education, 45(1), 103-112.: 
Diez-Olivan, A., Del Ser, J., Galar, D., & Sierra, B. (2019). Data fusion and machine learning for industrial prognosis: Trends and perspectives towards industry 4.0. Information Fusion, 50, 92-111.: 
Engineering Council. (2014). The accreditation of higher education programmes: UK standard for professional engineering competence (3rd edition). https://www.theiet.org/media/1775/accreditation-ofhigher- education-programmes-third-edition.pdf: 
Ercan, M. F., & Khan, R. (2017, December). Teamwork as a fundamental skill for engineering graduates. In 2017 IEEE 6th International Conference on Teaching, Assessment, and Learning for Engineering (TALE) (pp. 24-28). IEEE.: 
Lapitan Jr, L. D., Tiangco, C. E., Sumalinog, D. A. G., Sabarillo, N. S., & Diaz, J. M. (2021)..An effective blended online teaching and learning strategy during the COVID-19 pandemic. Education for Chemical Engineers, 35, 116-131.: 
Llorens, A., Berbegal-Mirabent, J., & Llinàs-Audet, X. (2017). Aligning professional skills and active learning methods: An application for information and communications technology engineering. European Journal of Engineering Education, 42(4), 382-395.: 
Manna, S., Nortcliffe, A., & Sheikholeslami, G. (2020). Developing engineering growth mindset through CDIO outreach activities. In Proceedings of the 16th International CDIO Conference, 2, pp.356-367.: 
Pee, S. H., & Leong, H. (2005). Implementing project-based learning using CDIO concepts. In Proceedings of the 1st Annual CDIO Conference, Kingston, Ontario, Canada.: 
Peimani, N., & Kamalipour, H. (2021). Online education and the covid-19 outbreak: A case study of online teaching during lockdown. Education Sciences, 11(2), 72.: 
Pusca, D., Bowers, R. J., & Northwood, D. O. (2017). Hands-on experiences in engineering classes: the need, the implementation and the results. World Trans. on Engng. and Technol. Educ, 15(1), 12-18.: 
Savage, M. J., James, R., Magistro, D., Donaldson, J., Healy, L. C., Nevill, M., & Hennis, P. J. (2020). Mental health and movement behaviour during the COVID-19 pandemic in UK university students: Prospective cohort study. Mental Health and Physical Activity, 19, 100357.: 
Savage, M. J., James, R., Magistro, D., Donaldson, J., Healy, L. C., Nevill, M., & Hennis, P. J. (2020). Mental health and movement behaviour during the COVID-19 pandemic in UK university students: Prospective cohort study. Mental Health and Physical Activity, 19, 100357.: 
Stoll, H. W. (1999). Product design methods and practices CRC Press.: 
Zainuddin, S. Z. B., Pillai, S., Dumanig, F. P., & Phillip, A. (2019). English language and graduate employability. Education Training.: 
Go to top
randomness